
( Brand: Geoprobe ), ( Manufacturer Part Number: 8MR1 )
The E-350 Geoprobe 8m 8MR1 Push Drilling Sampling System is a versatile and powerful tool for soil and groundwater sampling. This system is equipped with an 8-meter (26.25 feet) long drill rod, allowing for deep and comprehensive sampling. The 8MR1 rotary bit head is designed for efficient drilling in various soil types, including clay, sand, and gravel.
The system is mounted on a 1985 Ford 350 Van, which is a sturdy and reliable platform for transporting and operating the drilling equipment. The Ford 350 Van is equipped with a powerful engine, providing the necessary torque and horsepower to drive the drill rod into the ground.
The E-350 Geoprobe 8m 8MR1 Push Drilling Sampling System is equipped with a digital data logger, which records real-time data such as depth, temperature, and pressure. This data can be used to analyze soil and groundwater conditions, and to ensure that sampling is carried out accurately and consistently.
The system also includes a range of sampling equipment, including a variety of soil samplers and groundwater pumping equipment. This allows for the collection of a wide range of soil and groundwater samples, including undisturbed soil cores, split spoons, and groundwater samples for chemical analysis.
Overall, the E-350 Geoprobe 8m 8MR1 Push Drilling Sampling System is a high-quality and powerful tool for soil and groundwater sampling. It is well-suited for a range of applications, including environmental monitoring, geotechnical engineering, and hydrogeological studies. With its sturdy 1985 Ford 350 Van, powerful drill rod, and advanced data logging and sampling equipment, this system is a valuable asset for any organization involved in soil and groundwater sampling.
Pros of buying a E-350 Geoprobe 8m 8MR1 push drilling sampling 1985 Ford 350 van:1. Affordability: Older models like this one are usually more affordable than newer ones, making it a cost-effective option for those on a budget.
2. Durability: The Ford 350 van is known for its durability and reliability, which can translate to the Geoprobe equipment as well.
3. Versatility: The Geoprobe drilling system is versatile and can be used for various types of soil sampling.
Cons of buying a E-350 Geoprobe 8m 8MR1 push drilling sampling 1985 Ford 350 van:1. Age: The vehicle is over 30 years old, which means it may have wear and tear and may require more frequent maintenance or repairs.
2. Technology: Older models may not have the same advanced technology as newer models, which could impact efficiency and accuracy.
3. Compatibility: Older models may not be compatible with the latest software and technology used in the industry.
Ending conclusion:Buying the E-350 Geoprobe 8m 8MR1 push drilling sampling 1985 Ford 350 van could be a good option for those on a budget who need a reliable and versatile drilling system. However, it's important to consider the potential maintenance and repair costs, as well as any compatibility issues with newer technology. A thorough inspection of the vehicle and equipment is recommended before making a purchase decision.
Recommendation:If you are considering buying this vehicle, it would be a good idea to have a mechanic inspect the Ford 350 van to ensure it's in good working order. Additionally, research the compatibility of the Geoprobe equipment with your specific needs and any necessary software or technology. It may also be beneficial to compare the cost of this option with newer models to determine if the potential savings outweigh the potential costs and limitations.
Can not lock or open rear doors with handles. Rear latch of door does not always. Rear door open close assembly does not work. Rust spots, dents and scratches all over vehicle see photos.
Remote ignition starter turns van and Geoprobe system on. Rear view mirror fell off. New fuel pump assn strainer new filler hose new 3/4 water pump new thermostat assembly new wiper blades new tires. Gas gauge in cab shows no when tank is full.
Model should be 8MR1 and serial 9009r1. Geoprobe 8m 8MR1 direct push drilling sampling in 1985 ford E-350 econoline van more photos. A/C does not work.
Bottle jack, iron, etc - not tested. Mileage 67655van was recently serviced by a mechanic and the following done:oil filter lube top fluids charging system tested battery, alternator, voltage regulator starter. Left right turn signal blinkers intermittent. Side door does not close easily.
With a rotary member model 144, serial one asphalt drill bit and pole. Needs new turn signal switch. Spare tire - not a new but looks good.
Vacuum pump and fan work. Needs to be replaced. During operation noticed some fluid leaking the plastic hose guard has a few broken links in it.
Coolant radiator cap replaced brake master cylinder replaced and brake system bled. The radiator for hydraulic fluid is leaking. Unit is used and operational. Five 4ft hollow auger bits.
Cleaned and dusted air brakes carb removed, rebuilt, reinstall adjusted needed vacuum lines replaced. Replaced battery. Accessories: as shown in the photo's. Sh 9fljnv40clo14zd aadd4eet5wtuuzyawvsgne7wa. Del 0Geoprobe drill:the model tag on this unit says 9009r1, serial number 8MR1.
Requires some repairs: Geoprobe extends, lifts and tilts into place. Rear gas tank sender unit is bad. Fan under radiator works.
Alignment is bad, can not be safely driven over 40mph. Van:van runs and drives. Four of them appear to be new never used. A lot of assorted push rods, bits and attachments.
Flex pipe for exhaust pipes - to direct the away from operator. Both drill and hammer turn on appear working. Passenger side mirror very loose, will not stay in position.